SPIN-2
Specification
Height | 220 mm |
Width | 150 mm |
Thickness | 80 mm |
Weight | 1,6 kg |
Case | Plastic |
Power supply | 12 |
Modifications | In stock in | Qty | Buy | |
USA | Russia |
Select modifications
New modification SPIN-2M in metal case is available!
The technical characteristics are the same with SPIN-2 modification!
The effect of light reflection consisting in ability of optical objects to reflect the probing radiation in the opposite direction at an angle, close to a corner of its falling is the basis of the device operation principle.
Semiconductor laser IR the diode (transferring the channel) is a source of the probing radiation. The reflected signal is registered a sensitive video camera on the basis of a matrix CCD.
If necessary, depending on distance to object of supervision, the power of a raster of sublight can be changed for the purpose of obtaining the best contrast of the image. Focusing of the image on sharpness is made by adjustment of a lens of a video camera.
Work with the device consists in scanning of space of an estimated arrangement of the ESS and SS as well as detection on the monitor screen or the view-finder of the bright shining points (patches of light) in laser sublight raster zone. If out of the raster zone these points disappear, these points should be considered as the potential ESS an SS. Patches of light which don't disappear after switching off of laser illumination are not considered as the potential ESS and SS.
The device features binocular with protected blend which reduces the illumination level of the observer's face.
Detector type |
1/2", CCD |
Size of receiver |
752x582 pixels |
Focal distance |
75 mm |
Field of view (FOV) |
4.9° x 3.6° |
Focus control range |
2...1000m |
Distance of ESS and SS detection |
up to 1000 m |
Microisplay: - type and resolution |
AMLCD 0,44", |
Built-in backlight illumination |
laser |
Wavelength |
808 nm |
Backlight illumination FOV |
0.8°x2.4° |
Functional capabilities
- automatic shutdown at the category of the battery;
- indication of a condition of the accumulator;
Video |
PAL, LEMO connector |
Power supply
Self-contained power supply: |
|
Time of continuous work without battery recharge at normal climatic conditions |
not less than 5 hours |
Weight including battery unit |
1,5 kg |
Overall dimensions |
215x144x75 mm |
Protection class |
IP65 |
Operating temperature range |
-20°C...+45°C |
Secret observation search results
Height | 220 mm |
Width | 150 mm |
Thickness | 80 mm |
Weight | 1,6 kg |
Case | Plastic |
Power supply | 12 |
Operation time | at least 3 hours |
Delivery set:
3. Container for batteries
4. Charging unit
5. Mains adapter for charging unit
6. Video cable
8. Protective packing. Plastic case with a foam-rubber pad
Please note: software upgrade can cause recorder’s breakdown. This is not a warranty case. All the new recorders have the latest software version and there is no necessity to upgrade software after buying the recorder. Don’t take the risk. In case there are problems with audio recorder operation please apply to our technical support specialist: support@ts-market.com